Blog

Painted or Bare? Deciding on Period Floorboards in a London Home

How to decide on painting period floorboards in a London home, from colour and sheen to how painted boards change the room.

12 November 2026 7 min read

Painting period floorboards is a decision before it is a job. Once the boards take colour, the floor stops reading as timber and starts reading as the largest continuous colour surface in the room — and everything above it changes accordingly. This guide is about making that call honestly: when paint serves a period London floor, when bare timber is the better answer, and what the specification involves once the decision is made.

What painting the floor changes in the room

A painted floor becomes the anchor of the scheme. Wall colours read differently against a painted floor than against warm bare timber, the skirting line changes character, and the room gains a deliberate surface where it previously had a neutral one. That commitment is exactly why some of the best period interiors use painted boards — and why the decision deserves the same attention as the wall colour.

Three things change the moment the boards take colour:

  • The skirting and joinery relationship. Floor and skirting in the same colour read as one calm, continuous surface. A contrast line reads as architecture. Both work, but they produce different rooms, and the choice should be made rather than inherited.
  • The wall colours. A floor colour either supports the walls or competes with them. Strong wall finishes generally need a quieter floor; quiet walls can carry a stronger one.
  • The sense of the room. Pale boards open up a low-light room; dark boards give a room weight and presence. Neither is more authentic to period houses — both appear in London homes of every era.

When bare timber is the better answer

Bare boards are the right call when the timber itself is the character of the room: wide boards, dense grain, an even tone, and a surface that can be maintained as timber. If the floor is one of the features the house is valued for, painting it trades a genuine material for a colour — sometimes a fair trade, sometimes not.

Paint tends to earn its place in the other cases:

  • Patched or mixed floors. Boards replaced over decades, in different timbers and tones, rarely read as one floor when bare. Paint unifies them honestly.
  • Heavy old finishes. Boards carrying layers of old varnish, stain, or wax can be stripped back, but the disruption of full stripping should be weighed against the finish you actually want to live with.
  • Floors that need to anchor a scheme. In rooms where the walls carry limewash or paper, a painted floor gives the eye a settled base to rest on.

Paint is not a way of avoiding preparation. A floor in poor condition still needs to be made sound; colour simply changes what the room sees at the end of the work.

Colour: the floor as the anchor of the scheme

The floor colour should be settled at the same time as the walls and woodwork, not chosen in isolation afterwards. Because the floor runs under everything, it is the surface the rest of the scheme is judged against — and a colour that looked decisive on a sample card can behave very differently across twenty square metres of boards.

The trade-offs we talk through with clients:

  • Dark floors give a room weight and can look striking, but in our experience they show dust, scuffs, and chips more readily. They suit rooms that are cleaned often and furnished deliberately.
  • Pale floors open up a space and suit low-light London rooms, but they show gaps, grain, and any knot that was not fully sealed before painting.
  • Mid-tone and muted colours sit between the two and are often where period floors end up — enough presence to anchor the room, enough forgiveness for daily life.

Judge the colour with the actual furnishings in mind, not against a bare board: much of the floor will sit under rugs and furniture, and the parts that show are what set the tone. If the walls are being limewashed, the floor is the surface those softer finishes sit against — our limewash service covers that side of the scheme, and the two decisions belong in the same conversation.

Sheen and London light

Sheen on a floor is a wear decision as much as an aesthetic one, and London light settles the argument. Higher sheens generally clean more easily but catch the light across every ripple and sanding mark; dead-flat finishes look soft but tend to mark faster under daily use. For most period floors we work between those extremes.

The options we weigh:

  • Eggshell — the usual compromise. Enough sheen to wipe down, enough softness not to read every imperfection under low, angled daylight.
  • Dedicated floor paints — formulated for abrasion and cleaning; worth considering where the room sees heavy daily traffic.
  • Satin and above — hard-wearing and easy to clean, but on old boards it can read as a modern coating on a period surface, and it shows preparation faults most honestly.

A useful test is to look at the chosen sheen on a prepared board under the room's actual daylight before committing the whole floor. A finish that looks calm in the afternoon can look busy under a lamp at night.

What the specification involves once you decide to paint

Once the decision is made, the floor gets the same reading as any other period surface: what is on it now, what condition it is in, and what coating system suits how the room is used. Compress this stage and the colour sits on a surface that is not ready for it.

The stages we plan:

  1. Identify the existing finish. A water droplet that sits on the surface suggests an old varnish or wax; a droplet that soaks in suggests bare or weathered timber. Each case needs different preparation before paint will hold.
  2. Remove anything poorly adhered. Old coatings that flake under a scraper have to come off before anything new goes on, or the new finish fails with them.
  3. Sand to a uniform surface, working through the grits rather than jumping to a fine one, then vacuum and tack the floor thoroughly.
  4. Seal knots and stained areas. Resin in and around knots can migrate into a coating and show through as staining, sometimes long after the job looks finished, so knots get a blocking primer as a separate stage — checked under strong light before proceeding.
  5. Prime, undercoat, and finish as a compatible system, with a light de-nib between coats so each layer keys to the last, and cure times built into the schedule.

Gap decisions — leave, fill, or bead — are made on site, board by board, because the answer depends on the individual floor and the room, not on a blanket rule. For floors that are part of a wider redecoration, our painting and decorating service plans the floor, walls, and woodwork as one coordinated specification.

Living with painted boards

A painted floor is lived on, not just looked at, so aftercare belongs in the conversation before the colour is chosen. The sheen affects how the floor wipes down day to day; the colour affects how often marks and dust notice themselves; and the coating's cure time sets when rugs and furniture can go back. We build that timing into the schedule so the client knows exactly when the floor returns to use, and we talk through maintenance as part of handover rather than leaving it to guesswork.

None of this argues against painted floors — it just means the decision is better made with the daily reality of the room in view, not only the finished photograph.

A decision checklist before anyone opens a tin

Before committing the floor to paint, we expect every one of these to be settled:

  • Colour and sheen have been seen on a prepared board under the room's own light, both day and evening.
  • The floor colour has been decided together with the skirting, joinery, and wall finishes — not after them.
  • The existing finish on the boards has been identified, and anything poorly adhered is scheduled for removal.
  • Knots and stained areas have a sealing plan before any finish coat goes on.
  • The coating system — primer, undercoat, finish — is planned as a compatible set, with cure times in the schedule.
  • The gap decisions have been made board by board, and you are happy living with the answer.

Deciding before the work begins

Weighing painted boards against bare timber, or settling a floor colour against limewashed walls and papered rooms, is exactly the conversation worth having before the work starts. We carry out period-property decorating across Central London, West London, South West London, and Surrey — you can read more about how we work on the about page or request a quote through pulsenpaint.co.uk.

Planning a finish?

Start with the room and the surface.

Share the room, finish direction, and timing. Pulse N' Paint will advise on the practical next step before a quote.

Request a Quote